13 Pros and Cons of a Motorcycle Exhaust Wrap (And The Most Complete Operation Guide)

Among things that motorbikers dispute around, whether they should use exhaust wrap or not.

Like a lot of various other motorbike devices, exhaust wrap comes with some advantages that some people assume are worth having.

Do you understand why individuals want to wrap their exhausts? What are the benefits as well as disadvantages of it? What are the actions to follow if you want to wrap your motorcycle's exhaust pipe?

If you wrap your motorcycle's exhaust pipe with a safety shield and also want to make your journey much safer, you must check into a couple of things about wrapping as it has both pros and cons.

This write-up will tell you about 13 pros and cons of a motorcycle exhaust wrap, assist you to determine whether you should approach it or otherwise.

I'll additionally delineate the step-by-step process of wrapping an exhaust to ensure that you can do it in your way.

Pros of a Motorcycle Exhaust Wrap

1. Reduces Temperature

One of the main reasons that people think about adding such a wrap around the exhaust tube is to decrease the engine temperature.

It dissipates away from the heat from the engine to some extent as well as keeps the exhaust pipe well-functioned.

When you wrap your exhaust header, after that you're forcing the warmth that would generally dissipate alongside your engine block to take a trip further down the system.

This process develops a cooler temperature for the engine bay, which indicates you get a much better air consumption from the colder climate.

It can aid you to optimize the horsepower and throttle you can accomplish throughout a ride without creating a burn danger like you would certainly have in that area or else.

The wrap helps to push out smoke as well as warmth from the engine and also lengthens the lifespan of the exhaust pipe also.

If you don't have wrapping on your exhaust pipes, the interior warmth created inside the pipelines returns to the engine as well as makes it hotter.

Therefore, the overall performance as well as efficiency are compromised.

2. Protection Your Feet and Clothe

The number of times you mistakenly burn your feet touching the exhaust pipe?

I believe that many people have this experience. Many people have burned their ankles and burned expensive boots.

This point is really crucial as far as your physical safety is concerned.

While driving, it's highly feasible to contact the exceptionally hot exhaust pipes inattentively which may perilously affect your feet or ankles or your shoes. Exhaust wrap can contribute to a safety procedure in the circumstances.

Wrapping the exhaust pipe secures your leg as well as feet from burning.

Nonetheless, the wrap will still be warm to touch, but it will substantially minimize the opportunity of burning.

3. Prevent Exhaust Pipe Cooling

To guarantee the efficiency as well as the performance of the engine, the temperature level of the exhaust pipe requires to remain high.

This is something you can not accomplish without utilizing an exhaust wrap.

As the wrap is of metal, it remains reasonably high temperature, so does the exhaust pipe that it wraps around.

The high heat allows exhaust gases to move fast. As a result, the engine is able to release gases into the air smoothly.

4. Keep The Appearance Clean

The single-tube look of older motorcycles might be taken into consideration as "vintage" or "classic" today, but it takes a lot of jobs to maintain it tidy.

Excessive heat can colorize the metal, even if you're using high-grade steel that can manage those temperature levels.

If you can fit the wrappings outside the exhaust perfectly, it can magnify the look of your bike multiple times.

When you wrap the exhaust, then you can hide this incongruity without experiencing a whole layer process.

There is nobody who does not want his car to look outstanding and also one-of-a-kind. Exhaust wrap will help you significantly hereof.

Your motorcycle still has a smoke as well as a smell for some time after you're ended up, however the job goes much faster and also it's a great deal less expensive to complete.

5. Change The Sound Of The Engine

A motorbike exhaust wrap can inhibit troublesome audios that occur during your trip. Some proprietors state that their engine creates something like a rattle or click, evocative of what a stitching device seems like at full speed.

Using an ideal exhaust wrap will decrease or get rid of the annoying audio to ensure that you can appreciate your time in the saddle a lot more.

6. Stylish Customization

You can determine which part of the exhaust system you want to wrap.

So, you have the choice of opting for wrapping the entire pipeline or some part of it. To match with the color of your motorcycle, there are several shade choices available too.

7. Protect The Internal Parts Of the Motorcycle

An exhaust wrap can pull the warmth away from some inner parts of the system.

Too much heat reduces the effectiveness and also the performance of relocating components.

When you use the wrap, it will certainly minimize the warmth significantly, increase the performance and lifespan of different parts of the motorbike.

8. Easy To Install

You can quickly install the wrap around the pipe. Roughly, it will just take an hr or less to set up the wrap.

According to how to wrap the exhaust pipe which I will talk about below, you entirely can install the exhaust wraps in your own garage with excellent simplicity as well as comfort.

Moreover, you can finish the job within even an hour. That's why motorcyclers who are professional are significantly interested to have an exhaust wrap on their motorcycle.

You will intend to make sure that your motorbike's manufacturer doesn't have any details tips or warnings to think about before starting the exhaust wrapping process.

Cons of a Motorcycle Exhaust Wrap

Now, it’s time to take a look at the other side of the coin. Prior to composing your mind, consider its disadvantages also so that you don't be sorry for after acquiring one.

9. Rust

if you leave your motorcycle idly for a couple of days, there is a high opportunity that you'll see growing rust on the exhausts because of water, which can harm your ride.

Traveling at city rates suffices to push that dampness away, so intend on riding at least a number of times monthly to prevent this disadvantage. Regular riding can be protected against corrosion considering that it will diffuse the water.

If you determine to wage an exhaust wrap for your motorbike, then you are also committing to a riding timetable throughout the year.

Some enthusiasts claim that you can spray a layer of silicone onto the exhaust prior to applying the wrap to avoid this downside. Others state that taking such activity doesn't provide an obvious outcome. You'll need to choose if it is worth investment.

10. Smokey

Soon after mounting and also using exhaust wrap, you may experience a smoky environment together with a rather bad odor.

When you begin the motorcycle, the exhaust pipe fumes, and also it creates the cover to scent negative that lasts for a while. Though it is very normal, it does not seem enjoyable to motorcyclists.

It's not such as the brand-new cars and truck smell of plastics as well as upholstery that people love. You will certainly not appreciate what your nose picks up with this work. The best guidance is to open up the throttle on an open stretch of road so that the wind clears the air for you.

11. Fire Hazard

If you have an older motorcycle with a solitary tube, after that an exhaust wrap can offer you some extra security against the warmth.

Some products enable you to do the whole system to ensure that you can require the higher temperatures out at the back.

The only problem with this method is that the product you put on your motorcycle can accumulate oil, grime, and also gas in the process.

If it gets too hot for any type of factor, then you'll have a fire hazard in position whenever a spill occurs.

You need to continue to be positive with your cleaning efforts on all motorcycles to make sure that an unexpected surprise doesn't occur in the middle of your trip.

12. Traces That Cannot Be Removed

As soon as you set up the wrap as well as utilize it for a few hrs on a running motorbike, it will certainly leave traces on the pipe.

To amplify, after the curing process, if you unpack the exhausts, you'll see fibers in position from the fiberglass wrap that are there permanently, it will certainly leave a thin determinant mark on the pipes which are something long-term.

So, think twice prior to the installation to ensure that you don't will to be sorry later on.

Splashing a layer of silicone prior to using the wrap could aid you to get it off in the future, definitely, it will not return exactly to its previous state.

If you doubt regarding waging this project after that refuse until you understand for sure that it is what you wish to carry your motorcycle.

13. Impact Secondary Sales

If you want to sell your motorbike in the future, after that an exhaust wrap might require to be delayed.

If you wrap the exhaust pipe, it will make you lose a group of potential customers, because everyone has their own ideas and aesthetics.

The benefits and drawbacks of a motorcycle header wrap often count on individual preferences to establish the final value of this project.

Some individuals like the appearance of this work and also take pleasure in the advantages of its visibility.

Others choose a ceramic covering or no additions rather. The decision to cover or otherwise to cover is inevitably yours to make.

The Most Complete Operation Guide

1. Disassemble Exhaust Pipe

By utilizing the wrench of the ideal size, you have to eliminate your exhaust pipe from the engine. In this action, a large-sized nut driver can be required to get rid of the nuts attached to it.

2. Purifying The Muffler Pipe

Take some lukewarm soapy water in addition to a soft towel. Then, wash the manifold area circumstantially.

When the pipe is cleaned, leave it for around half an hour to make it completely dry before relocating to the following step.

3. Fixed Muffler

In this step, you need to clamp the muffler pipe into the appropriate place using a tight clamp. Now, make certain that the pipeline is flawlessly resolved as well as positioned so that you don't require to move the pipe a lot while wrapping.

4. Paint The Pipe With Primer

Here, spray a can of heat reverberating paint primer on the muffler pipe area where you intend to set up the exhaust cover.

After that, please give it some time to dry before starting the next step.

5. Imbibe The Exhaust Wrap

Before launching the process of setup, you must imbibe the exhaust cover into the water from around 15 to 20 mins.

It will certainly not only make it significantly a lot more adaptable and simpler, but likewise, it will permit the wrap to hold the metal surface of the muffler pipe in a much better method.

6. Installment Of Exhaust Wrap

Currently, it's about time to begin wrapping. You should initialize a progressive covering procedure of your exhaust folding over the external surface of the pipeline.

While wrapping, it is essential to make sure that there are no air bubbles or any kind of loose covering. Below, you can utilize stainless steel hose pipe clamps or some polished ones to make it look much better. After that, before re-installing the exhaust on the motorcycle, leave it to air completely dry for almost 15 minutes again.

7. Reattaching The Muffler Pipeline

Finally, affix the muffler to your motorcycle's engine. After that, try to start the engine and also fire it up for a number of minutes.

The heat going through the exhaust line will quickly dry out the covering which lets binding with the muffler pipeline tight.

Here is a video you can watch the detailed steps.

The Expense Of Wrapping An Exhaust

As the setup procedure is quite simple, the whole price of wrapping your exhaust pipes is little compared to other modifications on your motorcycle.

That means, at an affordable, you can have the possibility to transform your motorbike cosmetically.

This will certainly include marks when you will decide whether you will wrap your exhausts or not.

Specifically, if you wrap with fiber glasses, they are available at $20 per 50 feet.

You can purchase a number of rolls of wrap for your exhaust pipe for less than $50 in a lot of places.

Depending upon how limited appearance you desire, you need to buy that lots of rolls. Directly, I will suggest buying 2 rolls. In order to have a thicker look, you may accumulate and wrap more.

You'll furthermore need flawless zip connections. Stainless steel zip connections will certainly offer you the most effective solution right here.

You can normally obtain a pack which will certainly be all that might perhaps be needed for this task, and also you can have it at around $5 at a neighboring repair store or vehicle parts shop.

If you need a whole set with stainless steel zip ties and various other devices, it's less than $100.

One optional point is, if you intend to spray on your exhausts with silicone prior to wrapping, it will certainly cost you $15 more.

Overall, the best conclusion of this job should not cost you more than $200, I think.

The price is relatively cheaper than other motorcycle accessories.

What Is The Best Exhaust Wrap For A Motorcycle?

Regardless of whether to utilize exhaust wrap on your motorcycle is a separate matter of discussion itself.

Keeping that apart, numerous keep considering whether fiberglass wraps or titanium wraps are better.

I located them both to operate in a very similar means. Nonetheless, the fiberglass wraps are somewhat less expensive, so that is the thing that I commonly opt for.

In essence, considering all these things, it is clearly noticeable that there can be reasons not to wrap your exhaust, but in my viewpoint, there are more valid points to cover it. In short, the advantages simply surpass the demerits.

Final Words

I hope, after reading this write-up, taking a decision pertaining to exhaust covering would end up being a bit simpler for you. If you locate this write-up helpfully, please feel free to share it on your social media sites systems. Likewise, if you have any questions, leave them in the comment box below.

You can also learn more about motorcycles here, such as 5 Steps To Clean Rust Out Of A Motorcycle Gas Tank.

And How Often Should You Change Motorcycle Oil[2021].

Or 8 Tips For Riding Your Motorcycle In Cold Weather.

Rodney L Herron

Rodney L is a technical writer and product consultant with over a decade of experience in the motor industry. Rodney is a fan of performance machines that run fast and loud and an expert in all things custom. His numerous articles and write-ups are available at our knowledge base. Whether it’s something wrong with your motorcycle or you are building a custom bike, you can trust Rodney’s experience.