Average Motorcycles Top Speed? [50cc To 2000cc Motorcycle Chart]

The speed of a motorcycle's top speed is based according to displacement and the type of the motorcycle.

More than 10 kinds of motorcycles and they are all made to meet their needs of theirs.

Therefore, the maximum speed of the same 800cc bike between cruisers and sports.

In this article, I will go over how the top speeds average for motorcycles of all CCs.

So, how fast can an average motorcycle's top speed go?

A typical motorcycle can achieve a top speed of 70 mph or 150mph.

The speed at which the motorcycles will differ based on the CCs, horsepowers, and torque, among other things.

Average Motorcycles Top Speed?
The following is the list of the top speed for the most commonly used and well-known motorcycle displacements:

The maximum acceleration of the commonly used and well-known motorcycle displacements are as follows:

Table of top speed for motorcycles chart for CCs

The minimum amount of motorcycles with cc that is allowed to be used on highways is 50cc. Therefore, I'll start with the 50cc top speed and work my way up to the most powerful motorcycle built until today.

What is displacement of a motorcycle?

Generallyspeaking, displacement of a motorcycle is the measurement of the size of the engine and is expressed as the cc (cubic centimeters cm3).

The top speed and acceleration of motorcycles are measured as CCs such as 500cc, 250cc., 600cc., 1000cc..

What is Motorcycle displacement?

Motorcycle displacement is the measurement of volume that pistons move per cycle.

It's a method of determine the volume of a engine ex- one cc is equal to 1mL. A 600cc motorcycle contains 600ml of volume.

The pistons of a motorcycle that move upwards and downwards to create power by burning gas and air inside the cylinder.

The bigger the piston, the more air and gasoline they can burn simultaneously within the cylinder, which generates more power. This is the reason the larger engines, the more power.

However, this is only the case to a certain extent For instance, the 650cc motorbike Kawasaki Ninja is 650cc and generates much more horsepower than motorcycle with a capacity of 2000cc. Yamaha VX 1900.

To determine the power or speed of the motorcycle, you cannot rely solely on the displacement.

There are many other factors to be considered, such as torque, horsepower power to weight ratio, etc.

You might also like the following: Fastest Dirt Bikes Top Speed In The World 

50cc Motorbike Top Speed

50cc motorcycles can easily go speeds of 30-55 mph. The maximum speed of 50cc is limited in mopeds and scooters. Therefore, it's possible to achieve a top speed of 60 mph using the restricted engine , but is unrestricted. A 50cc engines can achieve speeds of up to 55mph.

Scooters and mopeds are popular in the 50cc motor range, to create cost-effective and eco-friendly vehicles.

50cc motorcycles are the entry point for a lot of people, as well as for students who are 16 years old or more.

The main benefit of 50ccc bikes is that they are light in weight and simple to handle. and can be used by anyone with no prior experience.

However, 50cc cars like scooters and mopeds aren't allowed on roads in the majority of states due to the limit on the speed of 30 mph.

The speed I've listed is 50cc. This also includes dirt bikes.

While dirtbikes can be faster than scooters, they're intended to be used off-road. They are not allowed to ride on roads.

I've put together the most popular 50cc motorcycles this year and their highest speed to give you the most accurate information.

Top speed of 100cc motorbikes

Most 100cc bikes can attain a maximum speed of speed of 53-62 mph (85-100 km/h). There are dirt bikes of 100cc capable of reaching the top speed of 60mph up to 70mph. The Kawasaki KX100 can reach the maximum speed of 68mph and most street-legal 100cc bikes are able to reach 60mph.

100cc motorcycles are not common in the USA, or Europe, but they are very popular in emerging countries such as India. There are a lot of manufacturers that produce 100cc segments like Hero, Honda, TVS, Kawasaki, Bajaj, and many more.

What speed can a motorcycle with 125cc power travel?

Motorcycles with 125ccc can achieve a maximum speed at 80mph (128 km/h) however the speed average of motorcycles 125cc is 60mph to 75mph.

Kawasaki Ninja is one of the most powerful motorcycles of 125cc which can reach a maximum speed of 80 mph (128 kilometers/h). A 125cc motorcycle produces about 10 to 15 horsepower and is powerful enough for a ride on the highways.

How fast is 150cc motorcycle go?

A motorcycle with a 150cc capacity can attain a maximum speed of 84 mph (135 kilometers/h). The average top speed for 150cc motorcycles ranges from 70mph and 80mph.

150cc motorcycles have the power of 10hp to 18hp and can offer up to 1000 rpm. Let's discuss the 150cc bike's usefulness and its purpose.

150cc motorcycles are simple to handle and efficient in fuel consumption helps you save money. These bikes are efficient enough to be used for daily commutes and also for students who need a bike for their studies.

In addition, Yamaha R15 is the top sport motorcycle in the category that is a great example of the style, power, and a cost-effective bike. Unfortunately, R15 V3 is only available in India.

Yamaha YZF R15 v3

What speed can a motorcycle with a capacity of 250cc go?

A 250cc motorcycle is able to achieve a top speed of 110 mph. The average speed of 250cc bikes ranges from 80-110 mph. The 250cc motorcycles generate horsepower of between 15 and 25hp.

250cc motorcycles are thought to be the ideal choice for teenagers due to their strength. These bikes are a great option for beginners to start commutes or for shorter distances.

If you're interested in learning more about 250cc motorbikes I suggest you go through my article in which I've discussed 250cc motorcycles with great detail.

What speed can 300cc motorbikes be?

An A300cc motorcycle can reach a highest speed of 116mph (187 kilometers/h).

The top speed for a 300cc motorbike is 60 mph up to 116 speed.

Yamaha R3 is one of the fastest 300cc motorcycles .

It can reach a top speed of 116mph , and get 0-60 mph within 5.10 seconds.

300cc motorcycles can produce a horsepower between 18 and 42 HP with a stated 10,750 rpm.

If you're interested in learn more about the 300cc motorcycles than you can, then check out my article in which I've discussed the the 300cc bikes in greater detail.

What speed can an engine of 400cc be?

A motorcycle with a capacity of 400cc can reach speeds of 118mph, while the typical top speed is between 80mph and 120mph. Kawasaki ZXR 400 is the most powerful 400cc motorcycle and can reach speeds as high as at 118 miles per hour.

It was among the first well-known motorcycles of the 400cc class in sportbikes. It first came out in 1989 and then discontinued in 1999.

If you're keen to learn more about the 400cc motorcycles I suggest you go through my article where I've talked about 400cc motorcycles in depth.

What speed can a 450cc motorbike travel?

450cc motorcycle is capable of reaching the highest speed of 160mph. The average top speed for a 450cc bike is 80-120 mph. Kawasaki KX450F is among the fastest 450cc motorbike and has a speed of 160 km/h (258 kilometers/h).

What is the speed of the 500cc motorbike?

500cc motorcycles are capable of reaching the highest speed of 102mph (164 kilometers/hour). The time required for 500cc motorcycles to go from 60-100 mph ranges from 4.8 to 5.0 seconds. A 500cc motorcycle produces between 45 and 60 horsepower and is equipped with two or more cylinders of a 4-stroke engine.

A typical 500cc motorcycle that is equipped with a single-cylinder produces 40 horsepower and a top speed of 100 miles per hour. The speed can be different based on the kind of motorcycle and the type of engine that is mounted on it.

I have talked about 500cc motorcycles in-depth Learn more about 500cc motorcycles in depth.

What is the speed of a 650cc-600cc motorcycle be?

A 600cc motorcycle is capable of reaching the speed limit of 175mph (254 kilometers/h). The top speed for 600cc motorbikes ranges from 120 mph and 175 mph.

The fastest 600cc bike is the Yamaha YZF-R6. the Kawasaki Vulcan S is the fastest and has a top speed of 112mph.

600 CCs are thought to be the most popular size of engine for Japanese motorcycles. Kawasaki Ninja 650, has two cylinders and a horsepower of 11000 rpm, which produces 70 horsepower.

The Kawasaki ZX6R comes with four pistons, a maximum engine speed of 15,500 RPM, and produces a power of 103 horsepower. This is the reason why Kawasaki ZX6R's performance is superior to Ninja 650.

What is the speed the 700cc-750cc motorcycle go?

A 700cc motorcycle is able to reach the speed limit of 137 miles per hour (220 kilometers/h).

The 700cc model is slower than the 600cc since they are cruisers designed to be comfortable in a cruise. Therefore, the top speeds vary from 108mph to 137mph.

What speed can the 900cc motorbike go?

A motorcycle with a 900cc capacity can reach a maximum speed of 149 mph (240 km/h). The top speed for motorcycles with 900cc ranges from 100 mph to 150mph.

In general, cruisers or any motorcycles of this type have slower top speeds as compared to smaller-sized CCs. This means that you can see that even 600cc motorbikes are more powerful than those with 900cc.

However, I've clarified that only motorcycle displacement is not able to determine the speed at which it is best. It is not advisable to use CCs as the measure of the speed at which motorcycles can travel.

What is the speed the 1000cc motorbike be?

A 1000cc motorcycle is capable of reaching the maximum speed of 200 mph (322 kilometers/hour). The speed of the 1000cc motorcycle can vary from 130 mph to 200 mph.

The motorcycles that fall within 1000cc are incredibly speedy.

One of the fastest and most well-known motorcycles that is the Suzuki Hayabusa can reach the fastest velocity of 312 kilometers per hour (194 miles per hour). It is capable of achieving 60-100 mph in 2.6s.

1000cc isn't a good motorcycle for novice riders since it requires lots of knowledge.

It is recommended that you try out a lower displacement motorcycle. If you can, you can attend a motorcycle class for safe riding.

BMW S1000 XR

What speed can a motorcycle with 1200cc be?

In general, motorcycles with 1200cc capacity can reach speeds of 162 miles per hour.

However, the average speed can range between 118 and the 165-mph mark.

This Suzuki Hayabusa is the fastest motorcycle listed, even though it has a displacement of 1,340cc.

Suzuki Hayabusa can reach the highest speed of 194mph (312 kilometers/h).

What speed can a 1800cc motorcycle travel?

A 1800cc motorcycle is capable of reaching a maximum speed of 150mph (242 kilometers/hour). The top speed for 1800cc motorbikes ranges from 120 mph to 150 mph.

The majority of motorcycles that fall into the 1800cc class are touring and cruisers. This is the reason why the top speed of these motorcycles is lower in comparison to other CCs.

What speed can an engine of 2000cc be?

The 2000cc motorcycle is capable of reaching the speed limit of 140 miles per hour (234 kilometers/hour). The top speed is between 100 mph to 145mph.

You might think that since the displacement of a motorcycle increases, so will the top speed. But this is not always the case since it is completely dependent on the kind of motorbike it is.

These high displacement motorcycles are slower than the 600cc models. These 2000cc range motorcycles are heavy cruisers as well as touring motorcycles. They are also large and are designed for comfortable driving and cruising, these bikes don't move at the speed of sports motorcycles that have smaller displacement.

Factors that determine which motorcycle's Top speed is based

There is a myriad of factors that affect how fast motorcycles go however, in this list I've focused on the main ones:

The weight of the bike

The most important factor that influences the speed of a motorbike is its weight. bike itself. Many manufacturers are working to trim off the mass of their motorcycles. Every year they introduce an update to their model. The most important message is how much lighter than it was before, but without sacrificing performance.

To reduce the weight of the motorcycle, the majority of the components have been replaced by lightweight and more durable parts which can reduce the weight.

Therefore, if you're trying to achieve the highest speed, you should be aware of the motorcycle's weight. This is the reason why most sports bikes are built to be lightweight.

Tourer and cruiser motorcycles are heavier, which makes them slower than sports motorcycles regardless of the fact that their displacement is greater.

If you purchase an engine that is lightweight, it is possible to reach the speed that is the highest of heavier ones using an identical engine setup.

Types of motorcycles (Ergonomics)

The third most important aspect that influences the speed of motorbikes is the types of.

It is likely that you have noticed that sport motorcycles are more efficient than cruisers and unadorned. The main reason is the design of their chassis and engine.

It's all due to the diverse body designs of the motorbike and ergonomics.

In the field of ergonomics, the position of the handlebar also is a crucial factor in its positioning, and it can influence the speed of the motorcycle.

If you've noticed then every racing or sports motorcycle has an aggressive, forward-leaning riding position.

At speed the position of the super and sports sport motorcycle allows the aerodynamics to remain stable and allows the air not to get obstructed to speed.

When you examine cruisers and heavy touring motorcycles, you'll find that they're slower than sports even though their engines are larger.

Make sure to look over the design of the frame and the windshield to ensure you get the highest speed of your motorcycle.

Engines that are part of the motorbike

The final and most important aspect that determines the overall motorcycle's efficiency and performance is the engine itself. Since we are discussing the speed of a motorcycle's top speed and top speed, we must also look at the cylinders and strokes.

Because even if it is identical, if the strokes and cylinder's configuration differ, the overall performance, as well as the speed and endurance of the engine, is affected.

Since I don't want be boring you with the details of engine specs So I'll provide a brief overview in order to assist you with the first decisions and understand how they affect performance.

The first step is to discuss the strokes of an engine, then we'll discuss the cylinder's configuration on the motorcycle.

Two-stroke vs Four-stroke engine

To begin, let me say that the stroke isn't an engine-type motorcycle. It's just a model of engine used for the automotive engines of cars, motorcycles, and so on.

We have two kinds of engine designs that are two strokes as well as Four strokes. Let's discuss it in detail and learn the ways it affects the performance of motorcycles.

Two-stroke engine

Two-stroke engines have more RPM and speed than Four-stroke engines. Therefore, two-stroke engines are more powerful than Four-stroke engines.

If you're looking to speed up your speed, Two-stroke engines offer greater speed and RPM over the comparable cc using the design of a Four-stroke cylinder.

One thing to remember this is that two-stroke engines are more expensive and less reliable. They are also less durable than Four-stroke engines.

In addition the two-stroke engine begins to shake and produce an ominous sound when you drive at a high speed.

Two-stroke engines cause lots of pollutants by releasing burned fuel and oil in the air more than four-stroke.

Four-stroke engine

While Four-stroke engines aren't the same speed as a Two-stroke engine, it does have additional advantages.

Four-stroke engines are more durable, reliable as well as efficient than a two-stroke ones. It generally is quieter than two-stroke engines, which makes it more environmentally friendly.

In general, four-stroke engines contain more components than two-stroke engines so it's expensive as well as maintenance expenses are higher.

Four-stroke engines don't need pre-mixing of fuel and oil as do two-stroke engines. Additionally Four-stroke engines are eco-green because they don't release burned oil into the air or release burnt fuel as Two-stroke engines do.

So, the conclusion is that you should opt for the Two-stroke engine when you are seeking speed. If you're seeking durability, reliability, and efficiency, choose four-stroke engines.

Related post: What Is Best Motorcycle Engine Size To Start

Numbers of cylinders

Cylinders constitute the engine's power source. the engine. They are the area where fuel is ignited and then turns into power.

It is the number of engines that directly influences how fast and the RPM speed of the bike. A motor that has more cylinders will provide more power and performance than those with fewer cylinders.

However, the more cylinders are used, the greater fuel consumption is likely to rise. In the same way the engine that has fewer cylinders is likely to be efficient on fuel.

If your main goal is to speed up, opt for larger cylinder motorcycles such as four-cylinder engines. It is also possible to choose fewer cylinder motors when you're seeking a fuel-efficient bike.

Weight of the motorbike (Rider, Pillion, Luggage)

The final thing you need to be aware of is the light that is present on your motorcycle. It is also a reason (not an enormous one) that can hinder your highest speed.

If you're worried about speed, ensure that you have much as you can in your luggage in case you're planning to go on an extended ride. In addition, be sure you ride in a group when you're worried about speed.

I think that achieving the highest speed of any motorbike is mostly required by racers. However, for the regular motorcyclist whose goal is to enjoy the ride and enjoying the experience. In that case, the variance in speed doesn't matter as much.

Motorcycle Speed and Safety

Safety is always the first important thing when riding motorcycle.

When you are riding, remember to find a balance between speed and safety.

Will reducing speed definitely prevent motorcycle accidents? Not necessarily.

The National Highway Traffic Safety Administration(NHTSA) conducted a study in the 1980s. According to their data, the average pre-accident speed for more than 900 motorcycle accidents was only 29.8 mph.

That means most motorcycle accidents occurred when the rider was traveling only 30 mph.

In addition, the study showed that the average impact speed for motorcycle accidents was 21.5 mph.

What about motorcycle accidents caused by high speeds?

Only one in every 1,000 motorcycle accidents occurred at a speed of about 85 mph.

This result should be shocking and unexpected.

While, the pre-accident speed of motorcycle accidents is low. But, speeding is always the first reason of motorcycle accidents.

Here is part of the report data released by NHTSA:

"...Thirty-two percent of all motorcycle riders involved in fatal crashes in 2017 were speeding, compared to 18 percent for passenger car drivers, 14 percent for light-truck drivers, and 7 percent for large-truck drivers..."

You can see, a large portion of motorcycle accidents occur at high speeds. When they are happening, they always result in hurt and death.

In fact, the real data may be more serious than this. Because, NHTSA stipulates that an accident is considered speeding only if the record shows one of the following two situations:

• The police officer concluded that driving too fast for road conditions, racing or traveling in excess of the posted speed limit was a contributing cause of the accident.
• The motorcycle rider was subsequently charged with a speeding-related offense.

In other words, the data investigated by NHTSA only considers information from police reports and court records.

If the police report and court records do not indicate any of the above, speed is unlikely to be a factor.

Remember the following tips when you are riding in speed:

• Pay attention to and identify motorcyclists and other vehicles in traffic.
• Do not infringe on the right of way of motorcyclists.
• Do not ride distracted.
• Slow down when turning and pay attention to road conditions.
• Control your speed when driving on roads with low visibility.
• Drive carefully and reduce speed when encountering dangerous road conditions.
• Slow down when lane splitting.

Conclusion

In this article, I've thoroughly reviewed each motorcycle's displacement and were able to determine the typical top speed of a motorcycle.

The typical speed of a motorcycle can vary from 70 mph up to the 158-mph mark. The most well-known motorcycles range from 125cc-1000cc.

Here is the top speeds of the most popular motorbike displacements (CCs) These are:

• Motorcycle 125cc : 60mph 70mph
  
• 250cc bike : 60mph and 110mph
  
• 300cc motorbike : 70mph - 112mph
  
• 600cc Motorcycle : 100mph - - 158mph
  
• 800cc Motorcycle : 100mph - - 165mph
  
• Motorcycle 1000cc : 130mph 200mph
  

Richard R

With over 10 years of experience working on cars and trucks Item Training Supervisor Richard Reina is known around the office as one of our technical experts & real an "automobile person".

His rate of interest began, in his very own words, "at the age of two when his father educated him the distinction in between a Chevy and a Ford. Since then it's been cars regularly."

As a serious lover of practically all things with a motor Richard can address nearly any kind of inquiry related to car upkeep, fixing, or restoration & is a fact professional in electric motor background.